Clean Smart, Keep the Tint Sharp
Expert Tint Care Instructions

➡️ Before Tinting:
Please remove all personal belongings from your car, especially near windows.
Windows should be reasonably clean, but don’t worry — we’ll clean and prep them before applying the tint.
Let us know about any existing damage or issues with defroster lines, window rubbers, or previous film.

➡️ After Tinting:
The film may appear hazy or streaky for a few days — this is completely normal.
Small water bubbles may appear; they are part of the drying process and will disappear as the film cures.
Full curing typically takes 3 to 7 days, but can take up to 2 weeks in cold or wet weather.
Your vehicle will be noticeably cooler, with less glare and increased privacy.

1. Don’t Roll Down the Windows (for 3–5 Days)
Allow the adhesive to bond fully to avoid peeling or film movement.
2. Avoid Cleaning Interior Windows
Hold off cleaning for at least 7 days post-install to let the tint set properly.
3. Be Patient With Haze or Moisture
Visible fog, streaks, or light bubbles are part of the normal drying process.

✅ Clean Gently
Use a soft microfiber cloth and ammonia-free glass cleaner only.
✅ Avoid Sharp Tools & Stickers
No razor blades, abrasive materials, or adhesives should touch the tinted surface.
✅ Don’t Use High-Pressure Water Inside the Car
This may weaken the film’s edges or compromise the seal.
✅ Park Smart
Shade or covered parking can help extend the lifespan of your tint and reduce interior wear.

Your automotive tint is covered by Maxpro Window Films LLC & Xpert Window Tinting Ltd, which protects against: (WARRANTIES SHOWN ON INVOICE)
✔️ Peeling
✔️ Bubbling
✔️ Cracking
✔️ Fading or Discoloration (with proper care)